DIY Kit - Fisherman Rib Cardigan
The body of this cardigan is knit flat in one piece. The back panel is worked first from the bottom-up. Without casting off, the first front panel is worked from the top-down. The second front panel is knit from the top-down after casting off for the first front panel and reconnecting the working yarn. Stitches for the sleeves are picked up from the outer edge of the garment and worked in the round to the cuff. Two belt loops are made and then attached to the sides of the cardigan. A thin belt is knit and pulled through the loops.
Level: Intermediate
Sizes: XS - 2X/3X
Scroll right to see full chart:
|
Size |
Yarn Amount |
Width (side seam to side seam) |
Length (shoulder to hem) |
|
XS |
8 balls |
20” (50 cm) |
21.5” (54 cm) |
|
S/M |
9 balls |
23” (58 cm) |
22.5” (57 cm) |
|
L/XL |
11 balls |
25.5” (64 cm) |
24” (60 cm) |
|
2X/3X |
13 balls |
28” (71 cm) |
25” (63 cm) |
Kit Contains:
- Loopy Mango Mohair So Soft Yarn 65 yds 60 m | 50 g 1.8 oz each, 47% super kid mohair / 53% extra fine merino wool
- Size US 19 (15 mm) circular needles 20'' (50 cm) in length - optional
- Pattern
- Loopy Mango project bag
A tapestry needle may be helpful when seaming and securing all loose ends.
Buttons can be added to this style to make it your signature piece.
Care: Dry clean or hand wash cold, lay flat to dry. Please test any washing/drying method on a small swatch to ensure you like the end result. As with any soft chunky natural fiber, some shedding will occur. For further information and tips, please consult our Fiber Care Guide.
Yarn made in Italy, kit assembled in the USA.
Shown in Moss, Tiramisu, and Pretty In Pink.
*Due to delicate nature of mohair fiber, some shedding may occur
Helpful video tutorials for this project: